Description

The R-C3 module has 3 independent 32 bit counters, each with 3 optically isolated digital inputs. For each counter you can: - program operating mode: up/down counting, mono and bidirectional encoder, or measurement of period or frequency. - select the digital filter (from 100Hz up to 400KHz) Each counter has: - 3 LEDs to signal state of digital inputs - 8 pin connector for independent wiring of inputs If used with encoder, the module (powered externally from a front connector) provides the power supply to the individual connectors and can be configured by encoder type (Differential, Single Ended, Push-Pull, Open Collector). The module also has interrupts on the level controllable via software. The R-C3 is installed on the backplanes of the R-BUS(x) series, from which it receives its power supply.
  • Inputs for Differential, Single Ended, Push Pull, Open Collector encoder
  • Intercepts of speed level
  • 32 bit counters
  • Software configuration of inputs
  • Diagnostic LEDs for power supplies and alarm
  • Removable terminals supplied
  • In Conformity with UL508
''