Measurement Sensor Keyence GT2-P12L

Category - Keyence measurement sensors

FAMAGA always strives to provide the best prices and timings of supplies for its customers. We sell only original equipment and spare parts, although we are not always the official distributor or manufacturer's dealer. All displayed trademarks and part numbers are the property of their respective owners.

On website of FAMAGA you can buy Measurement Sensor Keyence GT2-P12L, and many other spare parts from the Keyence with delivery all over the United States, including: Dublin.For price list, delivery timings and other product features of the Keyence, please, or send a description of goods you need to our e-mail sales@famaga.us

Description

Description

Stylus type General-purpose Sensor head (Low measuring force type)

Model	GT2-P12L*1
Detection system	Scale Shot System II, absolute (no tracking errors) type
Measuring range	12 mm
Resolution	0.5 ?m
Indicated accuracy	2 µm (p-p)*2
Measuring force	Downward mounting	0.2 N*3
Side mounting	0.15 N*3
Upward mounting	0.1 N*3
Sampling cycle	4 ms
Mechanical response	4 Hz*2
Operation indicator light	2-colour LED (red, green)
Environmental resistance	Enclosure rating	-
Ambient temperature	-10 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	1,000 m/s2 (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)
Dust boot	-
Contact	SUS304, SUS440C*4
Sensor head cable	Optional (connect to relay connector)
Weight	Approx. 35 g (not including cable)*5
1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office. 2 Value when the ambient temperature is 20 °C. 3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. 4 Contacts are available as options sold separately. *5 Including the relay connector.