Description

Fibre Amplifier, Cable Type, Expansion Unit, NPN
Model FS-V22
Type Expansion unit: 1-output with cable, NPN
Light source Red LED
Response time 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)
Shift function Max. ±1,999 (variable)
Timer function Mode Timer OFF, OFF-delay timer, ON-delay timer, and one-shot timer, 1 to 500 ms
Control output NPN open collector output at 40 V with 20 mA max. and a residual voltage of 1 V max.
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption Normal S-APC mode OFF: 580 mW, S-APC mode turned ON or when the HIGH SPEED mode is selected.: 720 mW
ECO half S-APC mode OFF: 480 mW, S-APC mode turned ON or when the HIGH SPEED mode is selected.: 600 mW
ECO all S-APC mode OFF: 430 mW, S-APC mode turned ON or when the HIGH SPEED mode is selected.: 550 mW
Environmental resistance Ambient light Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)*1
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material Unit and cover are both polycarbonate made
Size W 9 mm x L 70 mm x H 30 mm
Weight Approx. 45 g (including 2-m cable)
*1 Ambient operating temperature with amplifier expansion 1 to 2 units: -10 to +55 °C, 3 to 10 units: -10 to +50 °C, 11 to 16 units: -10 to +45 °C
''