Sensor Keyence IL-1500

Category - Keyence sensors

FAMAGA always strives to provide the best prices and timings of supplies for its customers. We sell only original equipment and spare parts, although we are not always the official distributor or manufacturer's dealer. All displayed trademarks and part numbers are the property of their respective owners.

On website of FAMAGA you can buy Sensor Keyence IL-1500, and many other spare parts from the Keyence with delivery all over the United States, including: Dublin.For price list, delivery timings and other product features of the Keyence, please, or send a description of goods you need to our e-mail sales@famaga.us

Description

Description

Amplifier unit, Panel mount type

Model	IL-1500
Type	Panel mount
Main unit/Expansion unit	Main unit
Head compatibility	Compatible
Display	Minimum displayable unit	IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm
Display range	IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable)
Display rate	Approx. 10 times/sec.
Analogue voltage output	±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 ?*1
Analogue current output	4 to 20 mA Maximum load resistance of 350 ?*1
Control input	Bank switch input	Non-voltage input*2
Zero-shift input
Stop emission input
Timing input
Reset input
Control output	Judgment output	Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3
Alarm output	Open collector output (NPN, PNP changeover possible/N.C.)*3
Current	Power voltage	10 to 30 VDC ripple (P-P) 10% included, Class 2*4
Power consumption	2500 mW or less (at 30 V: 84 mA or less)
Environmental resistance	Pollution degree	2
Ambient temperature	-10 to +50 °C (No condensation or freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Case / Front sheet: Polycarbonate, Key tops: Polyacetel, Cable: PVC
Weight	Approx. 170 g (including attachments)
1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. 2 Assign an input of your choice to the 4 external input lines before using. 3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) 4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.