Orders of our clients | LABOM - buy at the lowest prices to USA on bos.famaga.us

25.06.2021

CC1020-A1056-H1 DL2300-A3007-L22 PRESSURE TRANSMITTER UNIVERSAL for diaphragm seal operation design: standard housing acc. to data sheet D4-029 measuring principle: piezoresistive explosion protection: without measurement: gauge pressure measuring range: 0...4 bar, overload limit 20 bar output signal: 4...20 mA, 2-wire circuit DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with coupling nut see data sheet D5-025 process connection: DIN 11851, DN 40 / PN 40 connection of meas. instrument directly screwed G 1/2 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process -10...+140 °C

23.06.2021

CC6020-A1091-H1-T110 DL4100-HY-A4007-L23-T61-W1020 DRUCKMESSUMFORMER COMPACT für Druckmittleranbau Bauform: mit Temperaturentkoppler gemäß Datenblatt D4-020-7 Ex-Schutz: ohne Drucksensor: Piezoresistiv für Überdruck Messbereich -1...9 bar, Überlastgrenze 60 bar Messgenauigkeit: Linearitätsfehler incl. Hysterese < + 0,2 % v.E. Abgleichgenauigkeit < +/- 0,2 % v.E. Ausgangssignal: 4...20 mA, 2-Leitertechnik elektrischer Anschluss: Winkelstecker nach DIN EN 175301-803-A (DIN 43650 Form A), IP 65, für Kabel ø 4-10 mm MEMBRAN-DRUCKMITTLER für Food/Pharma/Biotechnik Bauform: mit Clampanschluss gemäß Datenblatt D5-026 Prozessanschluss: nach DIN 32676 Reihe A (metrisch) für Rohre nach EN 10357, DN 25 / PN 25 Hygiene-Ausführung nach EHEDG Doc.8 und ASME BPE SF3 Oberflächenrauheit (messstoffberührte Teile) - Drehteile Ra <= 0,76μm - Membran Ra <= 0,38μm - Schweißnaht Ra <= 0,76μm Messgeräteanschluss: direkt verschweißt Mat. messstoffberührte Teile: Edelstahl W.-Nr. 1.4435 (316L) Systemfüllung: Silikonfreies Synthetiköl FD1 gemäß FDA 21 CFR 178.3570 / H1-registriert Einsatztemperaturbereich -10...+200°C Stempelung für Materialzeugnis nach EN 10204 3.1

16.06.2021

GA2700-HY GA2700-HY-A1433-C1050-G11-N2-T150-Z53 PA2430-F12-H1 RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 process connection: clamp connection nominal width: Tri Clamp 1" / 1 1/2", ø 50.5 mm temperature detecting element: ø 6 mm insertion length U1: 50 mm material wetted parts: stainless steel mat.-no. 1.4404 (316L) measuring resistor: 1 x Pt100, 3-wire technology, standard electrical connection: circular connector M12 x 1 (4 pins) incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) TRANSMITTER for temperature (Pt 100), programmable 0...150 °C error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard output signal: 4...20 mA, standard

15.06.2021

CC6020-A1093-H1-T110-W4999-W2675 DE1180-A4001-L23-T99-W4999 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation design: with temperature decoupler see data sheet D4-020-7 explosion protection: without pressure sensor piezoresistive for gauge pressure measuring range -1...24 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. output signal: 4...20 mA, 2-wire technology electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm ADDITIONAL DESIGN: see below Design for process temperatures up to 205 ° C - EAC-TR certification exemption statement - metrological certificate for the use in Russian Federation DIAPHRAGM SEAL for general application, screw-in thread see data sheet D5-032 per DIN 3852: G 1/2 A, PN 400 design: standard connection of meas. instrument directly welded material wetted parts: stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered DMB_787 temperature range: see below -20...+205°C

14.06.2021

CV3110-A1059-F80-H1100-M1-Y4-N51-T6-T31-K1085-W4020-W2002 DL9016-HY-E1-G1-A400-L22 CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 15,000 unit: bar H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without Y4 screw cap with window mat. Macrolon N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 1 switching module setting: at the factory, see below 1. switch contact: switch point: 8 bar breaker hysteresis:0,1% (falling) 2. switch contact: switch point: 10 bar breaker hysteresis:0,1% (falling) T6 case: hygienic design with screw cap material: stainless steel degree of protection: IP 66 incl, vent filter, stainless steel T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2002 CALIBRATION PROTOCOL: with 5 measuring points DL9 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology 016 design: APV flange design HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm E1 basic body material: stainless steel (316L) G1 diaphragm material: stainless steel (316L) A400 connection of meas. instrument directly welded L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C spare parts for fab.-no.: 1819962/10/003

2.06.2021

CK5220-A2057-K2 CK5220-A2057-K2 DL3200-A1007-L22 PRESSURE TRANSMITTER with bourdon tube, safety pattern gauge acc. to data sheet D4-036 safety case: NS 100 per EN 837-S1 case design degree of protection IP 65, with case filling, process connection bottom explosion protection: without process connection: G 1/2 B nominal range: 0...6 bar overload protected: 1.3 times output signal: 4...20 mA, 2-wire technology case filling: Labofin DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 process connection: per ISO 2852 for pipes per ISO 2037, DN 38 / PN 16 connection of meas. instrument with temperature decoupler A100, screwed G 1/2 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process -10...+140 °C

26.05.2021

CB6010-A1999-H1-K1010-T110 CB6 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 design: internal diaphragm explosion protection: without pressure sensor: piezoresistive for gauge pressure measuring range see below -1...17 bar, overload limit 60 bar H1 K1010 T110 output signal: 4...20 mA, 2-wire technology process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

26.05.2021

PA2200-F12-H1 PA2200-F12-H1 TEMPERATURE TRANSMITTER head mounted, SIEMENS Sitrans TH200, 2-wire, universal programmable digital transmitter with electrically isolated input / output wire-break and short-circuit monitoring for sensor diagnostic LED for checking sensor and internal device operation test jacks for monitoring the output signal without breaking the current loop explosion protection: without configuration: see below 0...250 °C H1 signal of sensor breakage: 22.8 mA sensor offset: 0 °C damping: 0 s output signal: 4...20 mA; 2-wire circuitry

20.05.2021

CB6010-A1060-H1-K1010-T110 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 design: internal diaphragm explosion protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. output signal: 4...20 mA, 2-wire technology process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

10.05.2021

CE6800 PRESSURE AND TEMPERATURE TRANSMITTER COMPACT measuring range: 0...10 bar, overload limit 30 bar, sensor type piezoresistive A1058 K1015 process connection: G 1 A, HYGIENIC, metal-to-metal joint T420 electrical connection: field housing of stainless steel with cable gland H1 pressure output signal: 4...20 mA, 2-wire circuitry temperature sensor: 1 x Pt100 in 3-wire circuitry, class A, for process temperature -20...+80 °C

5.05.2021

CE6800 PRESSURE AND TEMPERATURE TRANSMITTER COMPACT measuring range: 0...10 bar, overload limit 30 bar, sensor type piezoresistive A1058 K1015 process connection: G 1 A, HYGIENIC, metal-to-metal joint T420 electrical connection: field housing of stainless steel with cable gland H1 pressure output signal: 4...20 mA, 2-wire circuitry temperature sensor: 1 x Pt100 in 3-wire circuitry, class A, for process temperature -20...+80 °C

14.04.2021

CB6010-A199-H1-K1010-T11 Drucksensor (-1-17 bar)

31.03.2021

CE6800 CE6800-A1058-K1015-T420-H1-P1 PRESSURE AND TEMPERATURE TRANSMITTER COMPACT measuring range: 0...10 bar, overload limit 30 bar, sensor type piezoresistive process connection: G 1 A, HYGIENIC, metal-to-metal joint electrical connection: field housing of stainless steel with cable gland pressure output signal: 4...20 mA, 2-wire circuitry temperature sensor: 1 x Pt100 in 3-wire circuitry, class A, for process temperature -20...+80 °C Custom-Tariff-No.: 90262020

18.03.2021

GA2510-A101-B43-C121300-D2-M22-N2-T11-W2674 GA251 RESISTANCE THERMOMETER Pt 100 with thermowell see data sheet T4-025-2 0 explosion protection: without A10 process connection: G 1/2 B 1 material process connection: stainless steel mat.-no. 1.4571 (316Ti) B43 thermowell length total L: 395 mm C12 thermowell diameter: F1 = 9 mm 1 material thermowell: stainless steel mat.-no. 1.4571 (316Ti) 300 insertion length U1: 300 mm length of measuring insert l5: 405 mm D2 measuring insert: ø 6 mm, rigid M2 tolerance: class A per DIN EN 60751 2 application range: -50...+400°C N2 sensor type: 1 x Pt100, 3-wire technology T11 connection head: model B, cap with 2 slotted screws, IP 54 material: aluminium electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass W2674 EAC-TR certification exemption statement

10.03.2021

CC6020-A1061-H1-T130 DL5110-S1203-HY-A4007-L22-W1020 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation

2.03.2021

DX0036-HY-A3001-N2-L22-W1020 MZ1100-B39-W2002 CC2020-A1089-H1-T2 BA4210-A3090-T2 COMBIBAR PRESSURE MEASURING SYSTEM

25.02.2021

DX0036-HY-A3001-N2-L22-W1020 MZ1100-B39-W2002 CC2020-A1089-H1-T2 BA4210-A3090-T2 COMBIBAR PRESSURE MEASURING SYSTEM

4.02.2021

CV3110-B1059-F10-H1100-M1-N50-T31-K1085 DD4100-HY-A4007-L22 CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 B1 pressure sensor: piezoresistive for absolute pressure 059 nominal range: 0...16 bar abs., overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F10 measuring range: 0...16.00 bar abs. H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 0 switching module setting: standard, see below 1. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard 2. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard DD4 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 100 nominal width/pressure: DN 50 / PN 40 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C

4.02.2021

GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1 GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1 GA2700-HY RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 A14 process connection: clamp connection 23 nominal width: per ISO 2852, DN 25 / 38 (1" / 1 1/2"), ø 50.5 mm C1 temperature detecting element: ø 6 mm 050 insertion length U1: 50 mm G11 material wetted parts: stainless steel mat.-no. 1.4404 (316L) N2 measuring resistor: 1 x Pt100, 3-wire technology, standard T150 electrical connection: circular connector M12 x 1 (4 pins) Z52 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) W2002 CALIBRATION PROTOCOL: with 5 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F11 configuration: standard measuring range: 0...+100 °C, standard error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard H1 output signal: 4...20 mA, standard

12.01.2021

CC6020-A1061-H1-T130 DL5110-S1203-HY-A4007-L22-W1020 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation

12.01.2021

CC6020-A1061-H1-T130 DL5110-S1203-HY-A4007-L22-W1020 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation

15.12.2020

CA1100-A3092-H1-T120-K10

26.11.2020

GA2700

12.11.2020

CB2020-A1999-H1-T1-W4029 PRESSURE TRANSMITTER UNIVERSAL for general applications in fieldhousing design data sheet: D4-025 measuring principle: piezoresistive linearity error incl. hysteresis <= 0.3 % f.s. explosion protection: without zero point of range: relative process connection: G1/2 B measuring range: see below -250/+250 mbar output signal: 4...20 mA, 2-wire circuit type of protection: IP67

4.11.2020

CE6120-A1060-K1020-T120-H1 COMPACT PRESSURE TRANSMITTER with threaded connection design: flush mounted diaphragm, with temperature decoupler Ex-protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. process connection: threaded connection nominal width: M22 x 1.5 with O-ring and sealing washer gasket material: NBR electrical connection: circular connector M12, IP 65, union nut of polyamide output signal: 4...20 mA, 2-wire technology

26.10.2020

PH5100 PH5100-A1-F11 UNIVERSAL panel indicator acc. to data sheet M6-051 LED display, 5-digits, red, 16 mm high 96 x 48 mm housing format, depth 32 mm front protection IP 65 2 alarm outputs as relay electrical supply: 24 V DC +/- 15%, 50 mA processible sensor signal: current 0(4)...20 mA voltage 0...5/10 V 0...50 mV temperature Pt100, thermocouples supply: 100 to 240 VAC +/-10 %, 50/60Hz, 6 VA configuration: without configuration

8.10.2020

CB6010-A1999-H1-K1010-T110 CB6 COMPACT PRESSURE TRANSMITTER with threaded connection 01 design: internal diaphragm 0 explosion protection: without A1 pressure sensor: piezoresistive for gauge pressure 999 measuring range see below -1...17 bar, overload limit 60 bar H1 output signal: 4...20 mA, 2-wire technology K1010 process connection: G1/2 B nach DIN 837-1 material wetted parts T110 - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A), IP 65

28.08.2020

CE6110-A1087-K1010-T110-H1

12.08.2020

CE6800-A1058-K1015-T420-H1-P1

27.07.2020

CB6010-A1092-H1-K1010-T110 CB6 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 01 design: internal diaphragm 0 explosion protection: without A1 pressure sensor: piezoresistive for gauge pressure 092 measuring range -1...15 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. H1 output signal: 4...20 mA, 2-wire technology K1010 process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) T110 - socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A), IP 65

22.07.2020

CI4330-A1053-F1-H21-M22.2-Y12-T200 DD4100-HY-B50197L-L23-T76 Lever sensor

2.07.2020

CS2110-A1090-H11-T30- K1085-K136 Drucksensor

2.07.2020

CS2110-A1090-H11-T30- K1085-K136 Drucksensor

2.07.2020

CA2110-A1054-H11-T30-K1085- K195 Drucksensor

3.06.2020

CA1110-A3058-H1-T120 DE1180-A4001-L22

25.05.2020

CC6010-A1011-H1-T110 DL3300-HY-A4007-L22

25.05.2020

eco cc7510 Sensor (Bereich 0-10 bar, Spannungsversorgung 10-30 VDC, Ausgang 4-20mA)

5.05.2020

42010PI01 Pressure Gauge Type BE4220

21.04.2020

CE6120-A1053-K1010-T110-H1 Drucksensor

8.04.2020

GA2730-A10-C3028-M2-N2-T150-W4999-W4120-W2002.1

8.04.2020

GA2730-A50-C3098-M2-N2-T150-W4999-W4120-W2002.1

8.04.2020

GA2730-A50-C3037-M2-N2-T150-W4999-W4120-W2002.1

8.04.2020

CV3110-A1059.1-F80-H1100-M2-N10-T30-K1085-W4022-W2002-W26 74 DL3330-HY-A4007-L22-W4035-W1020

8.04.2020

CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020

8.04.2020

MZ1100-B64-W2002 CV3110-A1059-F80-H2100-M1-N10-T30-K1085-W4022-W2674 BH5200 ECO-A99-W5124-W2674 DL8090-HY-D2546-E7-G7-H2-A400-L23-T99-W4035-W1020

8.04.2020

BE4200-A2999-L4600-W4022-W5124-W1020-W2002-W2674 Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 BE4 2 case: NS 100 per EN 837-1 S1 0 case design: IP 65, process connection bottom 0 explosion protection: without A2 pressure connection: G 1/2 B 999 nominal range: see below -1 ... 6 bar L4 switch contact: magnetic snap contact 600 switch function: 1 x min. change over contact electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1020 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement

17.03.2020

CE6120-A1053-K1010-T110-H1 Pressure sensor

4.03.2020

CC 2020 Drucksensor Messbereich: -1...3 bar Spannung: 14...30 VDC Ausgang: 4...20mA

3.03.2020

FA 2600 24T3001 Bimetall-Thermometer

3.03.2020

BE 4220 Manometer

3.03.2020

GA 2610 24T2003 Widerstandsthermometer

3.02.2020

GA2700 Sensor Range: -50/+200C 1 x Pt 100 3-wire

30.01.2020

CX2001-A59 HOCHTEMPERATUR-DRUCKMESSUMFORMER

30.01.2020

CX2001-A64

30.01.2020

MX1005-A1-B1 Montagesatz

30.01.2020

BE4301-A2057-N4500 DP1280-A3001-L11

20.12.2019

CB6020-A1092-H1-K1010-T410 Precision pressure sensor

16.12.2019

GA2500-A2310191-B99-D2-M22-N2-T11-Z1-W4020 PA2100-F12-H1 Sensor

16.12.2019

GA9130-C201250-T11-Z1-W4020 PA2100-F12-H1 Sensor

27.11.2019

CS2110-A1059-H11-N10-T30.1-K1085-K193

22.11.2019

CE6120-A1058-K1020-T120-H1 CE6 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 12 design: flush mounted diaphragm, with temperature decoupler 0 Ex-protection: without A1 pressure sensor: piezoresistive for gauge pressure 058 measuring range 0...10 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. K10 process connection: threaded connection 20 nominal width: M22 x 1.5 with O-ring and sealing washer gasket material: NBR T120 electrical connection: circular connector M12, IP 65, union nut of polyamide H1 output signal: 4...20 mA, 2-wire technology

22.11.2019

CE6120-A1091-K1020-T311-H1 CE6 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 12 design: flush mounted diaphragm, with temperature decoupler 0 Ex-protection: without A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. K10 process connection: threaded connection 20 nominal width: M22 x 1.5 with O-ring and sealing washer gasket material: NBR T31 electrical connection: cable connecton, degree of protection, IP 67 1 cable length 5 m H1 output signal: 4...20 mA, 2-wire technology

18.11.2019

BE4200-A2092-L4120-W4999

18.11.2019

BH4240-A92 DL4100-HY-A4007-L23-T63-W1020

18.11.2019

GA2540-HY-A141066-C1222999- D2-M22-N2-T11-Z1-W4020-W1020-W2002 PA2100-F12-H1

28.10.2019

CS2110 PRESSURE TRANSMITER

28.10.2019

CC6020

28.10.2019

CA1110

24.09.2019

PASCAL CI41 Pressure transmitter with steel sensor (CI4103-A1053.1-F1-H21-M21.1-Y12-T200-K1010)

19.09.2019

CA1100-A3092-H1-T120-K10 CA1100: PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection see data sheet D4-019-4 A3: pressure sensor thin film for gauge pressure 092: measuring range: -1...15 bar, overload limit 100 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1: output signal: 4...20 mA, 2-wire technology T120: electrical connection: circular connector M12 degree of protection: IP 65 (standard) K10: process connection: G 1/2 B per DIN EN 837-1

2.09.2019

BR4201-A57.59-N4512.3-W4105-W5420 DL2100-A4007-L23-T63

2.09.2019

FU2401-A2524-D20903-F12130-N4200-W4003-W5417

20.08.2019

BE4220 BOURDON TUBE PRESSURE GAUGE WITH MAGNETIC SNAP CONTACT

2.08.2019

CX2001-A65

30.07.2019

CX2001-A65 Druckwandler

27.06.2019

CC6020-A1093-H1-T110-W4999 DE1180-A4001-L23-W499 Druckmessumformer 1...24 bar

14.03.2019

BH4250-A91-W4020-W1201-W2673 DL4100-HY-A4007-L22-W4066-W1020 Druckmessumformer Labom BH4250-A91-W4020-W1201-W2673-DL4100-HY-A4007-L22-W4066-W102

14.03.2019

BA5210-A2060-W2673 Labom Manometer BA5210-A2060

14.03.2019

BA5220-A2092-W1201-W2673 Labom Manometer BA5220-A2092-W1201-W2673

14.03.2019

BA5220-A2091-W1201-W2673 Labom Manometer BA5220-A2091-W1201-W2673

14.03.2019

BH4240-A90-W1201-W2673 DL4300-HY-A4007-L22-W4066-W1020 Druckmessumformer Labom BH4240-A90-W1201-W2673-DL4300-HY-A4007-L22-W4066-W1020

14.03.2019

BH4200-A92-W1201-W2673 DL4100-HY-A4007-L22-W4066-W1020 Druckmessumformer Labom BH4200-A92-W2002-DL4100-HY-A4007-L22-W4066-W1020

14.03.2019

CC6020-A1091-H1-T410-W1201-W2673 DL4100-HY-A4007-L23-T61-W4066-W1020 Druckmessumformer Labom COMPACT CC6020-A1091-H1-T410-W1201-DL4100-HY-A4007-L23-T99-W4066-W1020

14.03.2019

GA2700-HY-A1413-C1150-G11-N2-T150-Z52-W1201-W2673 PA2430-F12-H1 Temperatursensor Labom GA2700-HY-A1413-C1150-G11-N2-T150-Z52-W1201-PA2430-F12-H1

14.03.2019

GA2730-A10-C3998-M2-N2-T150-Z52-W4999-W1201 HP1200-HY-A25-B1412-E2050-G11-W1020 PA2430-F12-H1

14.03.2019

GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W1201-W2673 PA2100-F12-H1 Temperatur-Sensor PT 100 Labom GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W1201-W2673-PA2100-F12-H1

14.03.2019

BE4220-A2092-L4120-W2673 Labom Manometer BE4220-A2092-L4120

14.03.2019

BR4200-A91-L4500-W1201-W2673 DL4100-HY-A4007-L22-W4066-W1020 Labom Manometer BR4200-HY-A4007-L22-W4066-W1020

14.03.2019

GA2540-HY06-A141066-C1292999-D2-M22-N2-T11.10-Z1-W4035-W4 999-W1020-W1201 PA2100-F12-H1 Temperatur-Sensor PT 100 Labom GA2540-HY06-A141066-C1292999-D2-M22-N2-T1110-Z1-W4035-W1020-W1201-PA2100-F12-H1

14.03.2019

CC6010-A1090-H1-T120-W1201-W2673 DL4100-HY-A4007-L22-W4066-W1020 Drucksensor Labom COMPACT CC6010-A1090-H1-T120-W1201-W2673-DL4100-HY-A4007-L22-W4066-W1020

22.02.2019

GA9130-C201250-T11-Z1-W4020 PA2100-F12-H1

4.10.2018

BA4100-A58 BA acc. to data sheet D2-015 nominal case size: NS 63 41 case design: IP 65, process connection bottom 00 process connection: G 1/4 B A nominal range: 0...10 bar 58 accuracy: class 1.6 window: non-splintering glass

19.07.2018

Bimetall-Thermometer FA2300-A2548-D1207-F6996

19.07.2018

Temperatursensor GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W2002 PA2100-F12-H1

19.07.2018

Manometer BH4200-A92-W2002 DL4100-HY06-A4007-L22-W4035-W1020

19.07.2018

Manometer BE4220-A2092-L4120

19.07.2018

Sensor CC6020-A1091-H1-T410-W2002 DL4100-HY06-A4007-L23-T99-W4035-W1020

19.07.2018

GA2500-A2310191-B99-D2-M22-N2-T11-Z1-W4020 PA2100-F12-H1 WIDERSTANDS-THERMOMETER Pt100 ohne Schutzrohr

19.07.2018

GA9130-C201250-T11-Z1-W4020 PA2100-F12-H1 THERMOMETER-MESSUMFORMER mit Widerstandsthermometer

27.03.2018

W1020 MATERIAL INSPECTION CERTIFICATE per DIN EN 10204 - 3.1

27.03.2018

W1020 MATERIAL INSPECTION CERTIFICATE per DIN EN 10204 - 3.1

27.03.2018

MZ1100-B901-W2002 CC6010-A1089-H1-T410 BH4210-A89 DL3230-HY06-A4007-L23-T14-W1020 MZ1100 COMBIBAR PRESSURE MEASURING SYSTEM B901drawing no.: see below as per drawing PD-WC-00025 W2002 CALIBRATION PROTOCOL: with 5 measuring points CC6 PRESSURE TRANSMITTER COMPACT with diaphragm seal 01 design: standard 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 089 measuring range -1...3 bar, overload limit 20 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. H1 output signal: 4...20 mA, 2-wire technology T410 electrical connection: field housing of stainless steel, with cable gland, IP 65 BH4 BOURDON TUBE PRESSURE GAUGE with diaphragm seal connection, chemical design acc. to data sheet D2-029 2 case: DN 100 10 case design: IP 65, process connection at back A accuracy: class 1.0 per EN 837-1 89 nominal range: -1...3 bar pointer: with micro adjustment DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 3 design with clamp connection see data sheet D5-026 230 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 1 1/2" / PN 25 HY06 hygienic design per EHEDG Doc.8 and ASME BPE SF1: surface rouhgness (wetted parts) - turned parts Ra <= 0.51 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L23 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered T14 design temperature, media: -10..+150 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts Spare Part for serial no. 1511104/05/001-002

27.03.2018

GA2730-A10-C3998-M2-N2-T150-Z52-W2002 HP1200-HY06-A25-B1412-E2100-G11-W1020 PA2430-F12-H1 GA2730 RESISTANCE THERMOMETER MiniTherm for installation in separate thermowell acc. to data sheet T4-017 A10 instrument connection: union nut M12x1 C3 temperature detecting element: ø 3 mm 998 insertion length l1: to suit thermowell M2 measuring insert: class A as per DIN 60751 N2 sensor type: 1 x Pt100, 3-wire technology T150 electrical connection: circular connector M12 x 1 (4 pins) Z52 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) W2002 CALIBRATION PROTOCOL: with 5 measuring points HP1200 THERMOWELL, Type Series HP1200 acc. to data sheet T5-051 HY06 hygienic design: surface roughness (wetted parts) - turned parts Ra <= 0.6 µm - weld seam Ra <= 1.6 µm A25 instrument connection: M12x1 B1412 process connection: clamp connenction ø 50.5 mm DIN 32676 model A (metric) DN 25 / 32 / 40 DIN 32676 model B (OD, ISO) DN 21.3 / 26.9 / 33.7 / 42.4 DIN 32676 model C (inch, Tri-Clamp) 1" / 1 1/2" ISO 2852 DN 25 / 33.7 / 38 E2 thermowell diameter: ø 6 mm, reduced design to ø 4 mm 100 insertion length U1: 100 mm G11 material: stainless steel mat.-no. 1.4404 (316L) W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard H1 output signal: 4...20 mA, standard Spare Part for serial no. 1511104/04/001

25.01.2018

FU2430-A2160-D1207-F10996-G4-K39-L4630-R11-W4020 GAS EXPANSION THERMOMETER with switch function and capillary acc. to data sheet T3-029 FU 2 case: DN 100 43 case design: IP 66, bottom connection 0 explosion protection: without A2 accuracy class: see data sheet 160 nominal range: -50...+50°C D12 process connection: shanks rotating 07 nominal width: G 1/2 F10 temperature detecting element: ø 10 mm 996 insertion length L1 (mm): 198 G4 mounting: with wall bracket, aluminium K3 capillary: material stainless steel 9 length of capillary [m]: 5,00 L4 switch function: magnetic snap contact switch function: change over contact, 1. contact falling switched,2. contact rising switched 630 R11 window: Macrolon electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 ADDITIONAL DESIGN: marking (adhesive label), see below

25.01.2018

FU2430-A2524-D1207-F10996-G4-K39-L4630-R11-W4020 FU 2 case: DN 100 43 case design: IP 66, bottom connection 0 explosion protection: without A2 accuracy class: see data sheet 524 nominal range: 0...+100°C D12 process connection: shanks rotating 07 nominal width: G 1/2 F10 temperature detecting element: ø 10 mm 996 insertion length L1 (mm): 198 G4 mounting: with wall bracket, aluminium K3 capillary: material stainless steel 9 length of capillary [m]: 5,00 L4 switch function: magnetic snap contact switch function: change over contact, 1. contact falling switched,2. contact rising switched 630 R11 window: Macrolon electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 ADDITIONAL DESIGN: marking (adhesive label), see below

25.01.2018

FU2430-A2544-D1207-F10996-G4-K39-L4630-R11-W4020 GAS EXPANSION THERMOMETER with switch function and capillary acc. to data sheet T3-029 FU 2 case: DN 100 43 case design: IP 66, bottom connection 0 explosion protection: without A2 accuracy class: see data sheet 544 nominal range: 0...+160°C D12 process connection: shanks rotating 07 nominal width: G 1/2 F10 temperature detecting element: ø 10 mm 996 insertion length L1 (mm): 198 G4 mounting: with wall bracket, aluminium K3 capillary: material stainless steel 9 length of capillary [m]: 5,00 L4 switch function: magnetic snap contact switch function: change over contact, 1. contact falling switched,2. contact rising switched 630 R11 window: Macrolon electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 ADDITIONAL DESIGN: marking (adhesive label), see below

25.01.2018

FU2430-A2999-D1207-F10996-G4-K39-L4630-R11-W4020 GAS EXPANSION THERMOMETER with switch function and capillary acc. to data sheet T3-029 FU 2 case: DN 100 43 case design: IP 66, bottom connection 0 explosion protection: without A2 accuracy class: see data sheet 999 nominal range: see below -100...+100°C D12 process connection: shanks rotating 07 nominal width: G 1/2 F10 temperature detecting element: ø 10 mm 996 insertion length L1 (mm): 198 G4 mounting: with wall bracket, aluminium K3 capillary: material stainless steel 9 length of capillary [m]: 5,00 L4 switch function: magnetic snap contact switch function: change over contact, 1. contact falling switched,2. contact rising switched 630 R11 window: Macrolon electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 ADDITIONAL DESIGN: marking (adhesive label), see below

25.01.2018

HA8010-A99-G10-W4001 SCREW-IN PROTECTION TUBE as per DIN 43772 010 multipart welded with instrument inside connection A99 dimensions see below outside diameter 14 mm inside diameter 11 mm instrument connection G1/2 female process connection R 1/2B taper G10 material: stainless steel mat.-no. 1.4571 (316Ti) insertion length U1 [mm]: 200,0 W4001 ADDITIONAL DESIGN: free of oil and grease for oxygen applications

25.01.2018

CI4100-A1056-F2-H21-M21.1-Y11-T200-K1024-W4001-W4020-W4999 PRESSURE TRANSMITTER PASCAL Ci4 or general application process connection bottom see data sheet D4-016-1 CI4100 nominal range: 0...4 bar, Turndown max. 100:1, overload limit 10 bar; sensor type piezoresistiv A1056 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below -100...100 kPa H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English M21.1 Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 1 material front cover: polypropylene (black), window Macrolon degree of protection: IP 65 / IP 67 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm T20 0 cable clamps: spring clip terminals up to 1.5 mm² process connection: G1/4 A per DIN EN ISO 1179-2 (DIN 3852-11) model E K1024 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) W4001 ADDITIONAL DESIGN: free of oil and grease for oxygen applications W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W4999 ADDITIONAL DESIGN: see below with adapter R 3/8B taper

25.01.2018

CI4100-A1053-F2-H21-M21.1-Y11-T200-K1024-W4001-W4999 PRESSURE TRANSMITTER PASCAL Ci4 or general application process connection bottom see data sheet D4-016-1 CI4100 nominal range: 0...1 bar, Turndown max. 100:1, overload limit 3 bar; sensor type piezoresistiv A1053 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below -40...60 kPa H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 1 material front cover: polypropylene (black), window Macrolon degree of protection: IP 65 / IP 67 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm T20 0 cable clamps: spring clip terminals up to 1.5 mm² process connection: G1/4 A per DIN EN ISO 1179-2 (DIN 3852-11) model E K1024 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) W4001 ADDITIONAL DESIGN: free of oil and grease for oxygen applications W4999 ADDITIONAL DESIGN: see below with adapter R 3/8 B taper

25.01.2018

CI4100-A1059-F2-H21-M21.1-Y11-T200-K1024-W4001-W4999 PRESSURE TRANSMITTER PASCAL Ci4 or general application process connection bottom see data sheet D4-016-1 CI4100 nominal range: 0...16 bar, Turndown max. 100:1, overload limit 60 bar; sensor type piezoresistiv A1059 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below 0...600 kPa H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English M21.1 Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 1 material front cover: polypropylene (black), window Macrolon degree of protection: IP 65 / IP 67 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm T20 0 cable clamps: spring clip terminals up to 1.5 mm² process connection: G1/4 A per DIN EN ISO 1179-2 (DIN 3852-11) model E K1024 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) W4001 ADDITIONAL DESIGN: free of oil and grease for oxygen applications W4999 ADDITIONAL DESIGN: see below with adapter R3/8B taper

25.01.2018

BA4200-A9265-W4005-W4020 BOURDON TUBE PRESSURE GAUGE in chemical design 2 case: DN 100 per EN 837-1 S1 00 case design: IP 65, process connection bottom acc. to data sheet D2-026 A9 process connection see below R 3/8B taper 265 nominal range: 0...0.6 MPa W4005 ADDITIONAL DESIGN: free of oil and grease for oxygen applications W4020 ADDITIONAL DESIGN: marking (adhesive label), see below

7.12.2017

CB6010-A1092-H1-K1010-T110 COMPACT-DRUCKMESSUMFORMER für allgemeine Anwendungen

24.04.2017

CB6010-A1059-H1-K1010-T420-W2673 COMPACT-DRUCKMESSUMFORMER CB6010 soll mit einem 1/2" NPT Anschluss versehen werden ("-K1030-"). Das passt nicht überein mit der angefragten Einschweißmuffe MC1000-A1, da die Muffe ein G1/2" Gewinde hat. Daher wurde auch der CB6010 mit einem G1/2" Anschluss versehen ("-K1010-").

24.04.2017

MC1000-A1 Einschweißmuffe ø 32 mm aus Edelstahl, G 1/2 Innengewinde

24.04.2017

CI4120-A1059-F1-H21-Y12-T200-K1085 DRUCKMESSUMFORMER

10.04.2017

BE4301-C2059-N1520 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...16 bar059 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon

22.03.2017

BH4200-A90-W2002 DL3130-HY06-A4001-L23-W1020 BOURDON TUBE PRESSURE GAUGE with diaphragm seal connection, chemical design

22.03.2017

FA2400-A2520-D1207-F6996 BIMETAL THERMOMETER chemical design, stainless steel case

22.03.2017

GA2700-A1010-C1990-G11-N2-T150-Z52-W2002 PA2430-F12-H1 RESISTANCE THERMOMETER MiniTherm for general application

20.03.2017

BE4301-C2059-N1520-H4 DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...16 bar059 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX Überlastsicherung: 1,5fachH4 elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon

20.03.2017

BE4301-C2060-N1520 DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...25 bar060 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon

20.03.2017

BE4301-C2059-N1520 DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...16 bar059 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon

2.03.2017

BR4200-A90-L99-W4020 Manometer DL4100-A4007-L22-W1020

2.03.2017

BE4200-A2092-L4120-W4020 Manometer

2.03.2017

BH4240-A92-W2002 Manometer DL4100-HY-A4007-L22-W1020

14.02.2017

CX2001-A267 HIGH-TEMPERATURE-PRESSURE TRANSMITTER for high temperature application data sheet: D4-030-E1 CX2 Ex design: TÜV 02 ATEX 1971 X II 1/2G Ex ia IIC T4 Ga/Gb output signal: 4...20 mA, 2-wire technology degree of protection: IP 67 001 A measurement: gauge pressure 267 measuring range 0...1,6 MPa SPECIAL DIAPHRAGM SEAL for high temperature application connection flange: ø 90 mm, with 4 bore holes d = 13 mm and 2 dismantling screws M12 connection of meas. instrument: directly screwed G 1/2 diaphragm material: stainless steel mat.-no. 1.4435 (316L) extention length: h = 91 mm mat. sealing surface/extension stainless steel mat.-no. 1.4404 (316L) system filling: FMH1 operating temperature range: +10...+350 °C Customs-Tariff-No.: 90262020

14.02.2017

CX2001-A65 HIGH-TEMPERATURE-PRESSURE TRANSMITTER for high temperature application data sheet: D4-030-E1 CX2 Ex design: TÜV 02 ATEX 1971 X II 1/2G Ex ia IIC T4 Ga/Gb output signal: 4...20 mA, 2-wire technology degree of protection: IP 67 001 A measurement: gauge pressure 65 measuring range 0...250 bar SPECIAL DIAPHRAGM SEAL for high temperature application connection flange: ø 90 mm, with 4 bore holes d = 13 mm and 2 dismantling screws M12 connection of meas. instrument: directly screwed G 1/2 diaphragm material: stainless steel mat.-no. 1.4435 (316L) extention length: h = 91 mm mat. sealing surface/extension stainless steel mat.-no. 1.4404 (316L) system filling: FMH1 operating temperature range: +10...+350 °C Customs-Tariff-No.: 90262020

31.01.2017

CC6010-A1091-H1-T110 DL4100-A4007-L22 PRESSURE TRANSMITTER COMPACT Fabr.-No.: 0712506/01/001

27.10.2016

CC-6020 CC6020-A1999-H1-T110-W4999 DE1180-A4001-L23 PRESSURE TRANSMITTER COMPACT with diaphragm seal CC6 design: with temperature decoupler 02 explosion protection: without 0 pressure sensor piezoresistive for gauge pressure A1 measuring range: see below 999 -1/+24 bar output signal: 4...20 mA, 2-wire technology H1 electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, Form A), IP 65 T110 ADDITIONAL DESIGN: see below W4999 design for process temperatures up to 205°C DIAPHRAGM SEAL FOR GENERAL APPLICATION SCREW-IN THREAD see data sheet D5-032 DE per DIN 3852: G 1/2 A, PN 400 118 design: standard 0 connection of meas. instrument directly welded A400 material wetted parts: stainless steel mat.-no. 1.4404/1.4435 (316L) 1 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 acc. DMB_486 operating temperature range: see below -20...+205°C

27.10.2016

CC6020-A1999-H1-T110-W4999 DE1180-A4001-L23 Pressure transmitter COMPACT CC-6020 1…24 bar 4..20 mA

5.10.2016

CE6120-A1058-K1010-T110-H1 CE6120-A1058-K1010-T110-H1 COMPACT-DRUCKMESSUMFORMER

13.09.2016

BE4200-A2092-L4120 MANOMETER

13.09.2016

BH4240-A92 DL4100-A4007-L22 MANOMETER

2.09.2016

BE4200-A2092-N4200 DRUCKMESSGERÄT mit Rohrfeder und elektrischem Grenzsignalgeber, Chemieausführung gemäß Datenblatt D3-025 BE4 2 Gehäuse: NG 100 nach EN 837-1 S1 0 Ausführung: IP 65, Prozessanschluss unten 0 Ex-Schutz: ohne A2 Prozessanschluss: G 1/2 B 092 Anzeigebereich: -1...15 bar N4 elektrischer Grenzsignalgeber: Induktivkontakt mit Standard-Initiator (N) 200 Schaltfunktion: 1 x max. Öffnungskontakt elektrischer Anschluss: Anschlussstecker mit Kabelverschra

2.09.2016

BH4240-A92 DL4100-A4007-L23 DRUCKMESSGERÄT mit Rohrfeder für Druckmittler gemäß Datenblatt D2-029 BH4 2 Gehäuse-Nenngröße: NG 100 mit rückseitiger Ausblasvorrichtung nach EN 837-1 S1 IP 66, mit Flüssigkeitsfüllung, Prozessanschluss unten 40 A Genauigkeit: Klasse 1,0 nach EN 837-1 92 Anzeigebereich: -1...15 bar Zeiger: mit Mikroverstelleinrichtung DL MEMBRAN-DRUCKMITTLER für Food/Pharma/Biotechnik 4 Bauform: mit Clampanschluss Prozessanschluss: nach DIN 32676 Reihe A (metrisch) für Rohre nach DIN 11850, DN 25 / PN 25 100 A400 Messgeräteanschluss: direkt verschweißt 7 Material mediumberührte Teile: Edelstahl W.-Nr. 1.4435 (316L) Systemfüllung: Silikonfreies Synthetiköl FD1 gemäß FDA 21 CFR 178.3570 / H1-registri

24.08.2016

CE6800-A1058-K1015-T42 0-H1-P1 DRUCK- UND TEMPERATURMESSUMFORMER COMPACT mit frontbündiger Membran CE6800 A1058 Messbereich: 0...10 bar, Überlastgrenze 30 bar, Sensortyp piezoresistiv K1015 Prozessanschluss: G 1 A, HYGIENIC, metallisch dichtend elektrischer Anschluss: Feldgehäuse aus Edelstahl IP 67 mit Kabelverschraubung T420 H1 Druck-Ausgangssignal: 4...20 mA, 2-Leitertechnik Temperatursensor: 1 x Pt100 in 3-Leiterschaltung, Klasse A, für Prozesstemperatur -20...+80 °C P1 Statistische Warennummer: 90262020

6.07.2016

CB6010-B1999-H1-K1010-T110 COMPACT-DRUCKMESSUMFORMER für allgemeine Anwendungen gemäß Datenblatt D4-020-1 CB6 Ausführung: innenliegende Membran 01 Ex-Schutz: ohne 0 Drucksensor: Piezoresistiv für Absolutdruck B1 Messbereich: siehe nachstehend 999 1...17 bar abs Ausgangssignal: 4...20 mA, 2-Leitertechnik H1 Prozessanschluss: G1/2 B nach DIN 837-1 K1010 Material messstoffberührte Teile - Membrane Edelstahl W. Nr. 1.4404/1.4435 (316L) - Stutzen Edelstahl W. Nr. 1.4404/1.4435 (316L) elektrischer Anschluss: Winkelstecker nach DIN EN 175301-803-A (DIN 43650 Form A), IP 65, für Kabel ø 4-10 mm T110

14.06.2016

CA1110-A3058-H1-T120-K144-W4020 DRUCKMESSUMFORMER COMPACT ECO für Food/Pharma/Biotechnik

14.06.2016

CA1110-A3058-H1-T120-K124-W4020 DRUCKMESSUMFORMER COMPACT ECO für Food/Pharma/Biotechnik

14.06.2016

CE6120-A1061-K1022-T120-H1-W4020 COMPACT-DRUCKMESSUMFORMER für allgemeine Anwendungen

14.06.2016

CC6010-A1058-H1-T120-W4020-Z99 DRUCKMESSUMFORMER COMPACT mit Druckmittler

14.06.2016

GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W4020-W1201-W2673 PA2100-F12-H1 WIDERSTANDS-THERMOMETER Pt100 ohne Schutzrohr

17.05.2016

Druckmessumformer Labom CX2001 (CX2001-A267);

17.05.2016

Druckmessumformer Labom CX2001 (CX2001-A65)

17.05.2016

MX1005-A1-B1 Montagesatz MX1005 2 Zylinderschrauben mit Innensechskant nach DIN 912 M 12 x 55, Qualtität A2-70 A1 2 Dichtungen nach DIN 7603 A 27 x 32 AI B1

20.04.2016

CE6120-A1059-K1020-T120-H1 COMPACT-DRUCKMESSUMFORMER für allgemeine Anwendungen gemäß Datenblatt D4-020-1 CE6 Bauform: frontbündige Membran, mit Temperaturentkoppler 12 Ex-Schutz: ohne 0 Drucksensor: Piezoresistiv für Überdruck A1 Messbereich 0...16 bar, Überlastgrenze 60 bar Messgenauigkeit: Linearitätsfehler incl. Hysterese < + 0,2 % v.E. Abgleichgenauigkeit < +/- 0,2 % v.E. 059 Prozessanschluss: Gewindeanschluss K10 Nennweite: M22 x 1,5 mit O-Ring/Flachdichtung 20 Material Dichtung: NBR elektrischer Anschluss: Rundsteckverbinder M12, Schutzart IP 65 T120 Ausgangssignal: 4...20 mA, 2-Leitertechnik H1

LABOM

United States

Dublin

LABOM: List of the orders

We deliver equipment of LABOM
throughout the world

We can compile your order
according to your purchasing list.

LABOM

United States

Dublin

LABOM: List of the orders

We deliver equipment of LABOMthroughout the world

We can compile your order according to your purchasing list.

Send a request

We deliver equipment of LABOM
throughout the world

We can compile your order
according to your purchasing list.