Description

Proportional control valve »pulstronic II«, 3-way design, with control circuit, 24 V DC, G 1/8, DN 1, Pressure range 0 - 10 bar. For electronic pressure controlCompact, electropneumatic pressure regulating valve which converts an electronic signal to a pneumatic pressure.It is particularly suited for precise pressure regulation as well as for pressure control in conjunction with a constantflow due to its internal control loop with electronic pressure feedback.Operating principle:Two pulsed pilot valves change the pressure in the control chamber.A downstream pressure booster converts the pilot pressure into an outlet pressure.The outlet pressure is measured with a pressure sensor and fed into the internal control loop.The setpoint is established over the electrical plug-in connector as a standard signal (0 to 10 V).
B [mm]46.5
DN 1.0
Electrical setpoint 0 - 10 V, 0 - 20 mA, 4 - 20 mA
Failsafe behaviour Maintenance of press. in case of loss of voltage-non control
Flow rate [l/min]13
Flow rate measurement At P2 = 6 bar
H [mm]105.6
Housing POM
Hysteresis < 1% FS
Internal parts POM
Max. ambient temperature [°C]50
Max. medium temperature [°C]60
Max. working pressure [bar]10
Medium Air or neutral gases, filter.50 µm, lubricat. or unlubricat.
Min. ambient temperature [°C]0
Min. medium temperature [°C]0
Min. working pressure [bar]0
Operation Pulsed 3/2-way valves
Page No. WEB
Piloting 0 - 10 V
Reproducibility ± 0.5% FS
Sealant NBR, FPM
Thread G 1/8
''